Transfer Foil Gel

Simply the best foil gel in the nail industry; guaranteed! 

*We do not recommend, or guarantee the durability of any of our gel products when mixed or combined it with other brands.

*Our transfer foil gel, is a high quality UV gel, it was specially designed to transfer foils over any acrylic or gel nails.

*Apply transfer gel over a clean surface, cure for 90s on a UV light, not less than that. 

*Make sure you are using at least a 36 watts UV light, otherwise the gel will not properly cured, which will affect the effectiveness of the gel.

*After the gel has cured for 90s, evenly apply your foils

*Our gels must be cure with a UV/LED of at least 48 Wats & 365 nanometers, but no more than 390 nanometers.

*Consequently, make sure you put enough pressure all over the nail/designated work area to evenly transfer your foil. You can use your fingers, however, we recommend our rubber wand for better results.

*For exceptional results you must use our Embedding Gel over the foil in order to prevent any chipping off the foils. (We are not responsable for any chipping or mal function of our transfer foil gel, if not used in combination with our other nail products as recommended). Our products were especially designed to work together. Also, make sure you have a good quality LED/UV light.

*Consequently, apply one or two coats of our embedding gel polish over the foils and cure for 90 seconds.

*Lastly, apply any of our matte, or stellar top coat and cure for 90s.

•FOR PROFESSIONAL USE ONLY
•DO NOT USE THESE PRODUCTS IF YOU ARE NOT LICENSED AND TRAINED TO WORK WITH ANY NAIL PRODUCTS.